|Zinc, Copper, Aluminum, Magnesium, Lead, Tin, and Lead-tin alloys etc.
|Casting +Machining(if Need)+surface Treatment
|Place of Origin
|Wooden case or as required
|Medical equipment, Electronic,Aerospace industry, Led Lighting, Auto industry etc.
|Supply Ability: 500000 Piece/Pieces per Month
|1 - 10000
|10001 - 200000
|200001 - 500000
Ouzhan Precision Die Casting Capabilities and Features:
- Cost-effective mass production
- Partial integration eliminates operations
- Capabilities of manufacturing complex shapes
- Stable high quality in mass production
- Tight tolerances in die casting
- The long life of moulds
1. Metal mold casting method
Use a metal with a higher melting point than the raw material to make a mold. Among them are subdivided into gravity casting method, low pressure casting method and high pressure casting method. Subject to the melting point of the mold, the metal that can be cast is also limited.Die casting is belong to metal mold casting methods.
2. Sand mold casting method
Using sand as a mold material, sand with different compositions can be subdivided into green sand mold casting, surface dry sand mold casting, etc., but not all sand can be used for casting. The advantage is that the cost is lower because the sand used in the mold can be reused; the disadvantage is that the production of the mold is time-consuming, the mold itself cannot be reused, and the finished product can only be obtained after being destroyed.
3. Lost wax method
This method can be the outer film casting method and the solid casting method. This method has good accuracy and can be used for casting high melting point metals (such as titanium). However, due to the high price of ceramics, and the need for multiple heating and complicated production, the cost is quite expensive.
Aluminum/zinc alloy die casting workshop
Aluminum/stainless/carbon steel Sand mold casting workshop
Stainless steel/carbon steel lost wax casting workshop
Why choose us?
Delivery and payment
A3: Various type of 2D or 3D drawings are acceptable,such as JPG, PDF, DWG, DXF,IGS, STP, X_T, SLDPRT etc.
box, wooden case, pallet.
A5: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 1%. Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution i ncluding re-call according to real situation.